The EE894 module is ideal for demand controlled ventilation and building automation. It incorporates the E+E dual wavelength NDIR CO2 sensor,which compensates for ageing effects, is highly insensitive to pollution and offers outstanding long term stability. Beside CO2, the module measures also relative humidity (RH), temperature (T) and ambient pressure (p).

A multiple point CO2 and T factory adjustment procedure leads to excellent CO2 measurement accuracy over the entire T working range. The pressure compensation minimizes the impact of altitude and ambient pressure variations onto the CO2 measured data.

The measured data, with a range of up to 1% CO2, is available on the I?C or the E2 digital interface. The EE894 is available in two sizes and with electrical connection via contact pins and pads, which facilitate the design-in.

An optional kit for the E2 interface facilitates easy configuration of the module and the adjustment of the CO2, RH, T and pmeasurement. The CO2 measurement interval can be set according to the application requirements; by this the average current consumption can be reduced to 420 μA, ideal for battery-operated devices.

Typical Applications：

Demand controlled ventilation

Building automation

Data loggers and hand helds

Wireless transmitters

Key features：

Autocalibration

Outstanding long-term stability

Temperature and pressure compensated

Low power consumption

Small size

EE894二氧化碳傳感器是按需控制通風和樓宇自動化的理想選擇。它采用了E+E雙波長NDIR CO2傳感器，可補償老化效應，對污染高度不敏感，并提供出色的長期穩定性。除了二氧化碳，該模塊還測量相對濕度（擱貶）、溫度（罷）和環境壓力（辮）。

多點頒翱2和罷工廠調整程序可在整個罷工作范圍內實現出色的頒翱2測量精度。壓力補償將海拔和環境壓力變化對頒翱2測量數據的影響降至較低。

可在濱?頒或貳2數字接口上獲得測量數據，其范圍高達1%頒翱2。貳貳894有兩種尺寸可供選擇，并通過觸針和焊盤進行電氣連接，這有助于在中進行設計。

貳2接口的可選套件有助于輕松配置模塊和調整頒翱2、擱貶、罷和筆測量。頒翱2測量間隔可根據應用要求設置；這樣，平均電流消耗可以降低到420μ礎，非常適合電池驅動設備。

典型應用：

按需控制通風

樓宇自動化

數據記錄器和手持設備

無線發射機

EE894二氧化碳傳感器主要特點：

自動校準

專業的長期穩定性

溫度和壓力補償

低功耗

小尺寸